Making cosmetic products safe for users
Making cosmetic products available to consumers in Great Britain
- Status
- In force
- Official page
- www.gov.uk/guidance/making-cosmetic-products-available-to-consumers-in-great-britain#making-cosmetic-products-safe-for-users
- Published by
- Department for Business, Innovation, Science and Trade
- LegitCat checked
- 20 Nov 2026
What it means for sellers: Cosmetics: a UK Responsible Person, notification and English labelling
Cosmetic products available to consumers in GB must be safe for human health. The Product Information File (PIF) contains information on how safe a cosmetic product is for human health. This is why it must be kept up to date. The PIF supports cosmetic product safety by providing:
- a safety assessment, which confirms a cosmetic product is safe and gives the scientific evidence to support this
- details on good manufacturing practice, which includes what has been done when manufacturing a cosmetic product to make sure it is safe
Making cosmetic products safe for users also covers how a cosmetic product is presented. It must:
- not be mistaken for food
- have clear labelling
- have instructions on use and disposal
The Product Information File (PIF)
The Responsible Person must keep a PIF in English for all their cosmetic products. The PIF includes:
- a description of the cosmetic product
- the product safety report
- how good manufacturing practice has been followed
- evidence for the cosmetic product’s effects
The PIF must be kept for 10 years after the last batch of the cosmetic product was made available.
The cosmetic product safety report
Before making a cosmetic product available to consumers, its safety must be checked by a qualified safety assessor. The cosmetic product safety report forms part of the PIF.
The two parts of the cosmetic product safety report are:
- the cosmetic product safety information (part A). This is provided by the Responsible Person
- the cosmetic product safety assessment (part B). This is provided by the safety assessor
The cosmetic product safety information (part A) provides all the details needed to perform a safety assessment on a cosmetic product. It may be necessary to carry out or organise testing of a cosmetic product to complete this section. Part A includes information on:
- the ingredients, their concentrations, chemical names and toxicological properties
- the physical and chemical properties of ingredients and the final cosmetic product
- the product stability
- any microbial contaminants in ingredients or the final product
- how preservatives prevent microbial contamination of the product
- any impurities
- what has been used to package the product
- how the cosmetic product is likely to be used
- the quantities of the ingredients and final product the user could be exposed to
The cosmetic product safety assessment (Part B) is the safety assessor’s conclusions to part A. It includes:
- an assessment of the product’s safety
- any necessary warnings or instructions for the product
- the scientific reasoning for the conclusions of the safety assessment
- details of the safety assessor, including name, address, and proof of qualifications
How to get a cosmetic product safety assessed
The product safety assessment is carried out by a qualified professional. This is someone who has a university degree in pharmacy, toxicology, medicine, or a similar discipline. It is the responsibility of the Responsible Person to ensure the safety assessment is carried out by a suitably qualified safety assessor.
Good manufacturing practice for cosmetic products
The manufacture of cosmetic products must comply with ‘good manufacturing practice’. This is about how the reproducibility and quality of a cosmetic product is ensured when it is made.
Good manufacturing practice can be demonstrated through compliance with the relevant designated standard ISO 22716.
Good manufacturing practice for cosmetic products is different to good manufacturing practice for pharmaceuticals.
How to comply with good manufacturing practice
ISO 22716 describes practical things that can be done to apply good manufacturing practice. Whilst ISO 22716 is commonly used, it is not the only way to demonstrate good manufacturing practice. ISO 22716 says that the company producing cosmetic products must:
- make sure all people employed know their roles and responsibilities for production, control, storage, and shipment of cosmetic products
- make sure staff have appropriate training and skills for cosmetic product manufacture
- ensure the place cosmetic products are manufactured is regularly maintained and cleaned
- make sure the place cosmetic products are manufactured is set up to reduce the risk of products and raw materials mixing
- make sure equipment used for manufacturing is regularly maintained and avoids cosmetic product contamination
- know comprehensive information on supply chains for raw materials so any problems can be traced
- make sure any water used for cosmetic product manufacture is adequately treated and tested routinely for microbes and impurities
- have detailed information on how the cosmetic product has been produced
- know where in the manufacturing process to test cosmetic product quality
- give a cosmetic product a batch number and label
- check any equipment and the place the cosmetic product is being manufactured before manufacture, to minimise contamination
- make sure the quality of the product is maintained in storage, when being shipped and also when being returned
- record and justify changes to the manufacturing process
- use quality control as a way to find if a cosmetic product, raw materials, or items used for packaging change unexpectedly
- know and define the different types of waste generated during manufacture
- identify and dispose of waste in a controlled and sanitary way
- investigate any complaints or problems with a cosmetic product. This includes looking at measures which need to be taken to prevent problems happening again. It also includes verifying batches which have been affected by problems
- perform internal audits to ensure these steps (defined in ISO 22716) are being correctly implemented
- ensure there is up to date documentation in place to show what happens during manufacture, quality control, storage, and shipment of cosmetic products. Examples would include protocols and methods
Find more information on ISO 22716 and good practice manufacturing for cosmetic products.
What can and cannot be put in cosmetic products
It is important to know if there are any limitations on the use of substances in a cosmetic product. Substances may either be prohibited or restricted in use. Details on restrictions for substances can be found in Annex 3.
If colourants, preservatives, or UV-filters are being used any restrictions or prohibitions which apply must be followed. This is a positive list, meaning only substances listed in Annex 4, Annex 5 or Annex 6 may be used.
Carcinogenic, mutagenic, or toxic for reproduction (CMR) substances
Use of CMRs in cosmetic products is banned. Exemptions can be requested by industry for category 2 CMRs. The category 2 CMR will be assessed by a scientific advisory group and if found safe can be used. For category 1A and 1B CMRs, these are only assessed by a scientific advisory group if the criteria in Article 15 have been met.
Further information can be found on the Health and Safety Executive’s (HSE) Chemical classification page. This page contains the GB Mandatory Classification and Labelling List, which gives information on the CMR classification of chemicals.
New ingredients used as colourants, UV-filters, or preservatives
For all new ingredients which are used as colourants, UV-filters, or preservatives, so not listed in in Annex 4, 5 or 6, a safety dossier must be submitted to OPSS for safety assessment. This also applies to nanomaterials.
There is technical guidance on what needs to be submitted in a safety dossier for nanomaterials and what needs to be submitted in a safety dossier for all other ingredients. There is also a checklist detailing the information required for a safety dossier.
Safety dossiers must be submitted to the OPSS Safety Assessment inbox: [email protected].
How to notify OPSS about nanomaterials
A nanomaterial notification, separate to a cosmetic product notification, must be done for cosmetic products containing nanomaterials not listed in Annex 4, 5 or 6, used for a purpose other than as a preservative, UV-filter, or colourant. This is done on the Submit cosmetic product notifications service.
For cosmetic products containing nanomaterials listed in Annex 4, 5 or 6 and used in accordance with the restrictions further information is required as part of the cosmetic product notification.
The following guidance found on the Submit cosmetic product notifications service explains How to notify products containing nanomaterials.
Figures stated here
legislation.gov.uk (The National Archives) and GOV.UK. Contains public sector information licensed under the Open Government Licence v3.0.