Toys (Safety) Regulations 2011 Regulation 3
Interpretation
- Status
- In force
- Version from
- 31 Dec 2020
- Extent
- N.I.
- Official text
- www.legislation.gov.uk/uksi/2011/1881/regulation/3/ni
- LegitCat checked
- 20 Nov 2026
In these Regulations—
“the 1987 Act” means the Consumer Protection Act 1987;
“the Directive” means Directive 2009/48/EC of the European Parliament and of the Council of 18th June 2009 on the safety of toys ;
“the GPSR” means the General Product Safety Regulations 2005 ;
“authorised representative” means a person who has been appointed in accordance with regulation 25(1);
“CE marking” means a marking—
(a) by which a manufacturer indicates that a toy will comply with the essential safety requirements during its foreseeable and normal period of use; and
(b) which takes the form set out in Annex II of Regulation (EC) No 765/2008 of the European Parliament and of the Council setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93 ;
“conformity assessment” means the process demonstrating whether specified requirements relating to a toy have been fulfilled;
“conformity assessment activities” means activities relating to conformity assessment, including calibration, testing, certification and inspection;
“distributor” means any person who—
(a) is in the supply chain for a toy, other than the manufacturer or the importer; and
(b) makes the toy available on the market;
“economic operator” means a manufacturer, an authorised representative, an importer or a distributor;
“enforcement authority” has the same meaning as in section 45(1) of the 1987 Act;
“essential safety requirements” has the meaning given in regulation 5;
“harm” means physical injury or any other damage to health, including long-term health effects;
“harmonised standard” means a standard adopted by one of the European standardisation bodies listed in Annex I to Directive 98/34/EC of the European Parliament and of the Council laying down a procedure for the provision of information in the field of technical standards and regulations on the basis of a request made by the European Commission in accordance with Article 6 of that Directive, the reference of which standard has been published in the Official Journal of the European Union;
“hazard” means a potential source of harm;
“importer” means any person who—
(a) is established within the relevant market; and
(b) places a toy from a market outside the relevant market on the relevant market;
“intended for use by” means that a parent or supervisor shall reasonably be able to assume by virtue of the functions, dimensions and characteristics of a toy that it is intended for use by children of the stated age group;
“make available on the market” means supply in the course of a commercial activity (whether in return for payment or free of charge) for distribution, consumption or use on the relevant market, and related expressions shall be construed accordingly;
“manufacturer” means a person who—
(a) manufactures a toy or has a toy designed or manufactured; and
(b) markets that toy under that person's name or trademark;
“Module” means a Module of Annex II to Decision No 768/2008/EC of the European Parliament and of the Council on a common framework for the marketing of products, and repealing Council Decision 93/465/EEC and Module A, B or C shall be construed accordingly;
“notified body designation” has the meaning given in regulation 40;
“place on the market” means make a toy available on the relevant market for the first time, and related expressions shall be construed accordingly;
“recall” means take any measure aimed at achieving the return of a toy that has already been made available to the end user;
“ relevant market ” means -
(a) the market in Northern Ireland; and
(b) the market of the EEA states;
“relevant state ”-
(a) Northern Ireland; or
(b) any EEA state;
“risk” means the probable rate of occurrence of a hazard causing harm and the degree of severity of the harm;
“supply” includes offering to supply, agreeing to supply, exposing for supply and possessing for supply;
“toy” has the meaning given in regulation 4;
“ UK(NI) indication” means the marking in the form set out in Schedule 1 to the Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020;
“UK notified body” has the meaning given in regulation 40;
“withdraw” means take any measure aimed at preventing a toy in the supply chain from being made available on the market.
Annotations
- Words in reg. 3 substituted (N.I.) 31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 5 para. 2(1)(a)(i)
- Words in reg. 3 substituted (N.I.) 31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 5 para. 2(1)(a)(ii)
- Word in reg. 3 substituted (N.I.) 31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 5 para. 2(1)(b)(i)
- Word in reg. 3 substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 5 para. 2(1)(b)(ii)
- Words in reg. 3 inserted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 5 para. 2(1)(c)
- Words in reg. 3 inserted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(2), Sch. 2 para. 5(2)
legislation.gov.uk (The National Archives) and GOV.UK. Contains public sector information licensed under the Open Government Licence v3.0.